Cornell2019-10-08T19:17:03+00:00

Western Canada’s largest distributor of Cornell pumps, parts and services.

Cornell has been producing industry leading high-efficiency pumps since 1946. They provide unmatched pump solutions for the mining, agricultural, municipal, refrigeration and food markets.

REQUEST A QUOTE
REQUEST PARTS OR SERVICE

Clear Liquid Pumps

Cornell produces clear liquid pumps that are world renowned. Cornell’s clear liquid pumps are known for being the most durable, most reliable, highest efficient pumps in the entire industry. These clear liquid pumps can be found in applications across a variety of markets including agriculture, industrial, municipal and more. Cornell clear liquid pumps are available in range of configurations including close-coupled, SAE engine mounted, horizontal and vertical.

Cornell’s clear liquid pumps provide unmatched efficiency and as a result can save you thousands of dollars per year in energy costs. Their large selection of clear liquid pumps that exceed optimum efficiency standards.

When looking for a clear liquid pump look no further than Cornell. They provide industry leading clear liquid pumping solutions through innovation and passion.

View All Cornell Clear Liquid Pumps

Cutter Pumps

View All Cornell Cutter Pumps

Cornell cutter pumps address a need for a variety of markets to reduce clogging due to ragging. The blade cutter in Cornell’s cutter pumps allows for minimal efficiency loss while tackling aggressive plugging. Once a Cornell cutter pump is installed clients have seen dramatic increases in their up-time, thus resulting in saving thousands of dollars a year. With Cornell a cutter can be installed in more than 30 different pump models.

Cornell cutter pumps are designed and manufactured to lead the industry in efficiency, durability and innovation. Cornell cutter pumps are hardened to ensure a long lifespan and are specifically shaped to minimize flow restrictions. Cutter pumps saves a variety of markets labour and downtime that is required to clean out clogs from their pump systems.

When looking to increase up-time and save money on labour and outages for you pump systems and Cornell cutter pump is the perfect solution.

Food Process Pumps

Cornell Engineers understand the important role food handling pumps play in today’s marketplace. Their innovative single port impeller configuration with unique offset volute provides the end user with a food handling pump capable of transporting even the most delicate food products.

Cornell has built their worldwide reputation on quality and reliability. Their centrifugal pumps are engineered and manufactured to provide continuous and trouble-free operation. As a matter of fact, many Cornell pumps sold in the 50’s are still providing the same continuous and dependable service they did the day they were installed. No one is more committed to making your ownership a truly rewarding experience than Cornell.

In addition to a dependable pump system, today’s food process systems must also be efficient and economical. As energy costs rise, conservation and efficient operation become critical issues for end-users striving to minimize expenses associated with energy consumption. Cornell pumps maintain superb hydraulic operating efficiencies and are coupled with energy efficient motors.

View All Cornell Food Process Pumps

Hot Oil Pumps

View All Cornell Hot Oil Pumps

Enhanced vapor handling and improved sealing technology are central to Cornell’s latest hot oil pump innovations. When fresh product passes through a fryer, water tends to travel along the bottom of the fryer in a liquid phase at 392°F (200°C), until it reaches the pump suction where the action of the impeller breaks up the water into smaller droplets that flash into steam. Ordinarily, entrained steam would impair the pump’s head and flow, but Cornell’s innovative anti-cavitation system prevents this situation.

The metal bellows mechanical shaft seal, with an optional water-cooled seat, can be used where temperature requirements reach up to 550° F. This proven shaft sealing method was developed over many years of field testing and is optimized to provide food processors with the most reliable and cost effective seal system in the marketplace. The metal bellows seal provides superior performance in extreme temperature processing services. The bellows leaf construction offers greater metal dependability and more uniform bellows compression.

Hydro Turbines

You don’t need a raging river to take advantage of the energy savings a Cornell hydro turbine can provide. Heads as low as 50 feet, and flows as low as 90 gallons per minute can produce useable energy. Cornell’s high turbine efficiency is often found to be comparable with specially-built imported turbines. They are less complex, easier to install and require less maintenance. Cornell turbines are available in a wide range of configurations and mounting styles. Cornell’s approach to turbine applications has generated many new and innovative design features, resulting in unexpectedly high performance.

Industrial plants, municipalities, HVAC installations, and farms are tapping potential hydraulic energy sources to produce electric power as a revenue source, or as a means to reduce overall energy demands. The key to the system is the use of excess head to drive a turbine. The turbine may be used to drive a pump, a generator, or other power-requiring device. This technology makes it feasible for cities, farmers, resort managers, industrial plants and building managers to consider hydro turbines
in their plant power needs. Studies show that a turbine, driven by water from a natural stream or process stream, can generate enough electric power to pay for itself in a short time.

View All Cornell Hydro Turbines

Immerible Pumps

View All Cornell Immersible Pumps

Conrell provides unique and industry leading immersible pump solutions suitable for a variety of markets. Our approach to immersible pumps is to take a TEFC motor that is designed to run in air 100% of the time and adapt it to run submerged 1% of the time (in case of a flood).

The basic design of the immersible pump/motor incorporates a premium efficient, inverter duty, P-Base or C-Face TEBC motor (totally enclosed, blower cooled). The motor, as the name implies, is totally enclosed and cooled by a blower on top of the motor. If the motor becomes submerged, the blower motor fan shuts down without affecting the main motor. While the motor is temporarily submerged, the media cools the motor just like a true submersible. A special conduit box is used to prevent water leakage into the motor. The motor is designed to prevent infiltration of water along the shaft and into the motor by utilizing a triple redundant sealing system, including a patented hydroseal design. The motor-end bell housing incorporates the ‘inverted cup’ principle, which traps an air bubble under the motor as water rises, thus keeping water away from the shaft seal. The shaft is fitted with a hydroseal, which expels water and further reduces the chance of water reaching the shaft seals.

Refrigeration Pumps

Cornell’s refrigeration pumps have been used successfully in a variety of applications including cold storage, food processing,
refrigeration, ice production and turbine inlet cooling. Cornell refrigerant pumps are commonly employed in liquid overfeed and transfer pump applications utilizing anhydrous ammonia, aqueous ammonia, and halocarbons such as R-22 and other approved refrigerants.

Enhanced vapor handling and NPSHR characteristics are central to Cornell’s latest refrigeration pump innovations. Cornell has incorporated these designs features into our liquid overfeed pumps while maintaining four pole or six pole operating speed for close-coupled units. Since the introduction of our innovative refrigerant series of high head, low speed pumps, Cornell is working with our customers to address the increasing requirement for ultrareliability and superior performance characteristics.

View All Cornell Refrigeration Pumps

Self-Priming Pumps

View All Cornell Self-Priming Pumps

Efficient, durable, efficient and dependable are all words that people use to describe Cornell pumps. The Cornell STX, STL & STH Self-Priming Pump Lines are the newest products from Cornell Pump following a tradition of building world-class pumping equipment.

Efficient by Design is not only our mantra, but it is also our priority when designing our equipment. The Self-Priming Pump Line exceeds the efficiency ratings of the competition by multiple efficiency points, without sacrificing lift capability. This improvement translates into energy cost savings over the life of the pump.

In addition to being focused on efficiency, Cornell Pump is also known for its innovative features. The Self-Priming Pumps follow this tradition by the addition of the Cycloseal® sealing system, which will extend your seal life.

Have an existing self-primer installed? The Cornell Pump retrofit program allows the Cornell STX rotating assemblies to retrofit into your existing pump volute.

Solids Handling Pumps

Cornell has produced solids handling pumps since the 1950’s. Cornell offers a wide range of solids handling pumps, from 3” though 30” discharge size, to handle the most difficult solids applications.

Chopper impellers and cutter assemblies expand the capabilities of Cornell solids handling pumps to handle difficult solids. Many Cornell solids handling pumps are also available in CD4MCu for resistance to corrosion and pitting caused by abrasive solids.

Cornell Pump has been producing robust, highly efficient pumps since 1946 and our innovative pump concepts have provided unmatched value. Cornell solids handling pumps provide the reliability and interchangeability demanded in many applications. Cornell offers a wide range of solids handling pump models and configurations to fit into existing installations.

Cornell pumps are built using superior materials selected for their suitability to each pump’s intended application. Heavier casting walls, thicker shafts, and fully-machined impellers are part of what make Cornell pumps more rugged and durable than other pumps.

View All Cornell Solids Handling Pumps

Slurry Pumps

View All Cornell Slurry Pumps

Cornell’s new slurry pumps expand their line of dewatering pumping solutions to abrasive applications in the mining industry. With Cornell’s patented Cycloseal® technology, their slurry pumps are built to operate without flush water.

Cornell’s Cycloseal® design, with its unique deflector vanes, works with the expeller to create a cyclo-action. This action removes solids and abrasive material from the seal area while purging air and gas pockets – extending seal life and eliminating any need for venting or water flush.

All pumps equipped with Cornell’s Cycloseal® system have an optional run-dry feature available, which serves to lubricate the seal faces even when there is no liquid in the pump casing. In situations where the pump must run dry for several hours, or where the pump may suddenly lose prime without being shut off, the RunDry™ feature is a must.

The Cycloseal® system requires no external water flush, filters, grease cups, piping or instrumentation normally associated with packing or double mechanical seals.

Submerible Pumps

Cornell’s hydraulic submersible pumps exclusively feature Permco Motors.

Cornell’s submersible pumps are industry leading and offer features unmatched by other pump producers. These features include:

  • Heavy duty sleeve bushing design in a medium / small frame
  • Working pressure up to 4000 PSI
  • Speeds up to 2400 RPM
  • Flows up to 150 GPM
  • Doweled and high strength cast iron construction
  • 100% factory tested
  • High strength alloy steel gear and shaft sets
  • Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges
View All Cornell Submersible Pumps

NSF/ANSI 61 Certified Pumps

View All Cornell NSF/ANSI 61 Certified Pumps

NSF/ANSI 61 Certification allows Cornell Pump distributors to fully specify our pumps in installations that require NSF/ANSI 61 certification, and highlights our commitment to quality manufacturing standards.

Designed for potable water applications in municipalities, as well as housing developments, these Cornell pumps can be used to transfer water from rivers, wells, and reservoirs to treatment facilities, intra-facility, and to end-users. Useful in retrofits to abate lead and other contaminant issues. Also applicable in agricultural irrigation where lead content is regulated.

Water Quality Association (WQA), an Illinois-based testing organization, provided Gold Standard WQA NSF/ANSI 61 Standards and Product Certification on 23 Cornell Pump models. Cornell Pump works with WQA, providing samples of products at prescribed intervals to maintain their certification.

Cornell Pump Parts

Chamco is proud to be the exclusive distributor of Cornell pump parts to all of western Canada. Chamco offers a full suite of OEM replacement parts to ensure you can have your pump system up and running again as quickly as possible. Cornell pump parts are designed to Cornell’s exacting standards, these parts help ensure your warranty, and maintain your pump investment in top running shape.

Cornell also offers customized repair kits for some of their pumps. These kits include materials you’ll need in standard maintenance, such as:

  • Wear ring
  • Shaft sleeve
  • Vol. gasket
  • Impeller washer
  • Lockscrew kit
  • Impeller key
  • Impeller shims
  • Mechanical Seal
  • Lipseals
  • V-ring

Contact a Chamco representative for more information about specific pump parts, repair kits and pricing.

Cornell Pump Parts

Cornell Pump Engineered Systems

Cornell Pump Engineered Systems

Chamco is proud to be the exclusive provider of engineered systems that utilize Cornell pumps and pump solutions in all of western Canada. When looking to build engineered systems that will exceed our client’s expectations and meet all of their needs it is important to use the best pumps available. Being able to utilize Cornell pumps in our engineered systems makes our pump solutions industry leaders. Being able to use the best available pumps from Cornell allows us to ensure our clients that we offer the best engineered systems available in all of western Canada. If you are looking for an engineered system that will surpass your expectations in durability, efficiency and performance, look no further than the Cornell engineered systems offered by Chamco.

From 6 locations across western Canada, we are the exclusive suppliers and technicians for Sullair air compressors in the following areas:

British Columbia

Burnaby
Creston
Delta
Drayton Valley
Fort St. James
Fort St. John
Kamloops
Kootenays
Langley
New Westminster

Okanagan
Prince George
Prince Rupert
Richmond
Sparwood
Sunshine Coast
Surrey
Vancouver
Vancouver Island

Alberta

Athabasca
Calgary
Camrose
Canmore
Cold Lake
Drumheller
Edmonton
Evansburg
Fort McMurray
Fort Saskatchewan

Grande Prairie
High Level
Hinton
Leduc
Lethbridge
Lloydminster
Medicine Hat
Nisku
Peace River
Red Deer

Rocky Mountain House
Slave Lake
St. Paul
Stettler
Turner Valley
Wainwright
Whitecourt
Wood Buffalo